Abstract
Perovskite-based catalysts show a versatile catalytic ability for redox reactions, but are seldom applied for ammonium perchlorate (AP) decomposition. Their catalytic mechanism on AP decomposition still remains unknown. In this study, four different perovskites, namely LaCoO3, La2CuO4, LaMnO3 and LaNiO3, were prepared by co-precipitation method and then applied to catalyze the AP decomposition. LaCoO3 exhibited the best catalytic performance among all the perovskites used, in which the decomposition temperature of AP was lowered to 301.1 °C (114.9 °C lower than pure AP) and the heat release was increased from 768 to 1428 J g−1. A series of characterization on these four perovskites, such as XRD, SEM, NH3-TPD, O2-TPD and XPS, revealed that stronger adsorption abilities of catalysts for NH3 and O2 on the surface led to better catalytic performance, thus explaining their differences in the catalytic performance. Online TG/FT-IR further revealed that perovskite catalysts could significantly inhibit the conversion of N2O to NO, which was benefit to the enhancement of heat release. Finally, the perovskite catalysts were mixed with HTPB-based propellant to test their real application, and the results showed that perovskite containing HTPB-based propellant exhibited an increased burning rate and combustion heat, thus demonstrating their potential application in solid propellant.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have