Thermal Cycling Reliability of Sn-Ag-Cu Solder Interconnections. Part 1: Effects of Test Parameters

Abstract

The work presented in part 1 of this study focuses on identifying the effects of thermal cycling test parameters on the lifetime of ball grid array (BGA) component boards. Detailed understanding about the effects of the thermal cycling parameters is essential because it provides means to develop more efficient and meaningful methods of reliability assessment for electronic products. The study was carried out with a single package type (BGA with 144 solder balls), printed wiring board (eight-layer build-up FR4 structure), and solder interconnection composition (Sn-3.1Ag-0.5Cu) to ensure that individual test results would be comparable with each other. The effects of (i) temperature difference (ΔT), (ii) lower dwell temperature and lower dwell time, (iii) mean temperature, (iv) dwell time, and (v) ramp rate were evaluated. Based on the characteristic lifetimes, the thermal cycling profiles were categorized into three lifetime groups: (i) highly accelerated conditions, (ii) moderately accelerated conditions, and (iii) mildly/nonaccelerated conditions. Thus, one might be tempted to use the highly accelerated conditions to produce lifetime statistics as quickly as possible. However, to do this one needs to know that the failure mechanisms do not change from one lifetime group to another and that the failure mechanisms correlate with real-use failures. Therefore, in part 2 the observed differences in component board lifetimes will be explained by studying the failure mechanisms that take place in the three lifetime groups.