Abstract

Silkworm silk, a potential material used as the matrix of conductive fibers, has attracted extensive attention due to its excellent mechanical properties. However, researches on its thermal properties, especially in the axial direction of the single silk fibroin fiber are less. In this study, the axial thermal conductivity of a single silk fibroin fiber after coating a gold film on the surface is measured using the 3ω method. The effects of the radiation heat loss on the intrinsic thermal conductivity are eliminated by varying the length of the test samples. The results show that the thermal conductivity of the single silk fibroin fiber decreases slightly as the temperature increases from 260 to 300 K. The extracted intrinsic axial thermal conductivity is about 0.775 W/m-K at room temperature, an order of magnitude higher than most textile fibers. The method proposed in this study can be extended to accurately measure the thermal conductivity of the other non-conductive micro-fibers.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.