Abstract
A deep geological repository has been considered as one of the most appropriate options for the disposal of high-level radioactive waste (HLW), and it will be constructed in a host rock area at a depth of 500 to 1000 m below the ground surface. The geological repository system is based on the concept of an engineered barrier system, and it consists of a disposal canister with packed spent fuel, buffer material, backfill material, and intact rock. The buffer plays an important role to assure the disposal safety of HLW since it can restrain the release of radionuclides and protect the canister from the inflow of groundwater. Since an increased heat quantity is released from the disposal canister into the surrounding buffer material, the thermal conductivity of the buffer material constitutes a key parameter needed to analyze the entire disposal safety. Therefore, this study presents a thermal conductivity prediction model for compacted bentonite buffer material from Kyungju, which is the only bentonite produced in Korea. The thermal conductivity of the compacted bentonite buffer from Kyungju was measured using a hot-wire method according to varying degrees of saturation, dry density, and temperature. The measurements showed that the thermal conductivity was concurrently influenced by the degree of saturation, dry density, and temperature variation. A regression model was proposed to predict the thermal conductivity of the compacted bentonite buffer from Kyungju using the degree of saturation and the dry density as the dependent variables. An additional regression model was also introduced that incorporated the temperature variation as an additional dependent variable, and the two models were directly compared with each other.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.