Abstract
In this paper, rare-earth fluorides were used as sintering additives instead of rare-earth oxides, the influence of the type and the amount of the fluoride on the thermal conductivity, hardness and strength of Si3N4 ceramics was studied. Results show that the thermal conductivity of a sample sintered with CeF3 is nearly 10% higher than that of the sample sintered with Ce2O3, while the samples sintered with LaF3 increases further 15% as comparing with the samples sintered with CeF3. The strength of the samples changes reversely. These results express that the thermal conductivity of Si3N4 ceramics can be improved by using rare-earth fluoride additives instead of the oxides, and the type of rare-earth fluorides has a significant impact on the properties of Si3N4 ceramics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
