Abstract
Metal stearate blends are potential lubricants and filler dispersants in polymer compounding. Therefore, the thermal phase behaviour of binary blends of calcium stearate and magnesium stearate with zinc stearate was investigated. Cooling curve studies indicated lower melting temperatures in both systems. X-ray diffraction studies revealed that this was due to the formation of solid solutions of variable composition rather than to eutectic formation. Rheology measurements showed that true fluidification only happened well above the apparent melting points established from cooling curves. Calcium carbonate filled polyethylene containing metal stearate mixtures showed lower melt viscosities than were achievable using only calcium- or magnesium stearate as the lubricant. These results suggest that metal stearate blends, in combination with a judiciously selected wax component, may offer advantages in lowering compound melt viscosity and facilitating better particle dispersion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
