Abstract
AbstractA novel and low‐cost mixture of iron and magnesium have been synthesized and used as selective coatings for flat plate absorber in solar water heating system. The commercial black paint is fabricated with the mixture of composition Fe3(PO4)2·0.1Mg2P2O7·1.9 MgSO4(FPM3A). The composition of the coating mixture has been characterized by various analytical techniques. Thermal studies of these mixtures were accomplished using differential scanning calorimetry and thermo‐gravimetric analysis. From the thermal analysis, it has been observed that the mixtures can be used as thermal heat storage materials. The FPM3A‐modified black paint has been tested in a thermosyphon solar water heater prototype. The average water temperature and efficiency of the flat plate absorber with FPM3A‐modified black paint have increased by an average of 7.5° and around 12%, respectively, in comparison with that with commercial unprocessed black paint.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
