Thermal and Mechanical Properties of Thermal Barrier Coatings

Abstract

The material property measurements of thermal bamer coatings from cyclic fumaa, thermal rig, thermal expansion, acoustic emission and tensile adhesion test methods are critically examined. Some basic engineering properties of coatings such as the elastic modulus have not been measured without ambiguity. Data of this nature is essential to the success of modeling studies. Insights into the mechanical properties of coatings have been gained by carrying out instrumented tensile adhesion tests. The general view of the coating deformation process is that the individual lamelhe slide wer each other and this promotes a pseudoductility response in the coatings. Monitoring of the acoustic emission response of coatings during thermal cycling aperiments suggests that there are two distinct cracking processes. The macrocracking behavior, indicated by a change in the acoustic emission count rate, is the predominant mechanism which leads to coating failure. It is further shown that the acceptance tests used by industry, although useful in ranking coatings in terms of a particular property, present no fundamental knowledge concerning the material properties of coatings. It is only when the phenomenological characteristics of the thermo-mechanical response of coatings is undemtood that coating development will substantially progress.