Abstract
AbstractThe effect of electron beam irradiation on the thermal and mechanical properties of poly(vinyl chloride)/polystyrene (PVC/PS) blends and PVC/PS blends containing epoxidized natural rubber (ENR) was studied. The thermogravimetric analysis study showed that the thermal decomposition of the plasticized PVC individual polymer goes through two stages, whereas PS decomposes through one stage. However, the temperature of the maximum rate of reaction (Tmax) of PS is much higher than that for PVC and their blends. Meanwhile, the Tmax was found to increase with increasing PS ratios in the blend. The thermal stability of PVC/PS blends was greatly increased after electron beam irradiation in comparison with unirradiated blends. Moreover, the addition of ENR to PVC/PS increased the thermal stability. On the other hand, the mechanical properties in terms of tensile strength and elongation at break of PVC/PS blends are lower than pure PVC polymer because of the immiscibility. However, the addition of ENR to the PVC/PS (80/20) blend increased the elongation at break from 114 to 321% associated with a small effect on the tensile properties. These behaviors were supported by structure morphology studies observations, which indicate an improvement in the interfacial adhesion between the phases. POLYM. COMPOS., 2008. © 2008 Society of Plastics Engineers
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
