Thermal and Mechanical Degradation of Recycled Polylactic Acid Filaments for Three-Dimensional Printing Applications.

Abstract

The recycling of filaments used in three-dimensional (3D) printing systems not only mitigates the environmental issues associated with conventional 3D printing approaches but also simultaneously reduces manufacturing costs. This study investigates the effects of successive recycling of polylactic acid (PLA) filaments, which were used in the printing process, on the mechanical properties of recycled filaments and printed objects. The mechanical strengths of the printed PLA and the adhesion strengths between 3D-printed beads were evaluated via the tensile testing of the horizontally and vertically fabricated specimens. Gel permeation chromatography analysis revealed a reduction in the molecular weight of the polymer as a result of recycling, leading to a decrease in the mechanical strength of the 3D-printed product. Additionally, scanning electron microscopy images of the cutting plane showed that the fabricated beads were broken in the case of the horizontally fabricated specimen, whereas in the case of the vertically fabricated samples, the adhesion between the beads was weak. These findings indicate that the mechanical strength in the in-plane and out-of-plane directions must be improved by increasing the mechanical strength of the bead itself as well as the adhesion strength of the beads.