Abstract
Experiments have been carried out to investigate the performance of a new swirl flow duct which is suitable for compact heat exchangers such as radiators. The ducts tested have rectangular cross sections with aspect ratio 1 to 8, and multiple V-shaped ribs are attached to the wide walls in a staggered arrangement such that square secondary flow cells are established. A previous investigation has shown that multiple V-shaped ribs may provide greater heat transfer enhancement than angled straight ribs and V-shaped ribs at Reynolds numbers below 2000. The data are presented as j and f factors for Reynolds numbers from 500 to 15,000, and correlations are obtained for the influence of rib height (0.1 < e/H < 0.2), rib pitch (3 < p/H < 7), and rib angle (15 deg < Φ < 45 deg). It was found that a rib angle of 45 deg provided the highest j/f ratio, while increasing the rib height or decreasing the rib pitch lowers the j/f ratio.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
