Thermal and evolved gas analyses of the oxidation of a cellulose/copper(II) oxide mixture

Abstract

Cellulosic biomass is a promising alternative energy resource from the viewpoint of sustainability. The use of waste materials as cellulosic biomass could additionally contribute to a recycling society. It is thus essential to develop safer processes in order to expand utilization of cellulosic biomass as a useful resource in the future. For example, in some cases, construction wastes contain wood preservatives, including metal oxides that can act as catalysts for the oxidation of organic materials. Copper(II) oxide (CuO) is a major component in wood preservatives and is known to catalyze the oxidation of cellulose. There is, therefore, possibility for spontaneous ignition within large piles of wood chips from construction wastes. In this study, we focused on the thermal behavior of a cellulose/CuO mixture, measured using a Calvet-type heat flux calorimeter. In addition, Fourier transform infrared spectroscopy and gas chromatography were applied to analyze the oxidative decomposition gases of the cellulose/CuO mixture, and a reaction mechanism was proposed. It was revealed that CuO promotes the oxidative decomposition of cellulose and increases the quantity of the gases that evolved from cellulose with a catalytic cycle. The influence of CuO on oxidation of cellulose is greater at lower temperatures and spontaneous ignition, fires, and explosions are likely to increase when wood chips containing CuO are stored for long periods of time.