Abstract
In this study, the effect of clamping pressure on the performance of a proton exchange membrane fuel cell (PEMFC) is investigated for three different widths of channel. The deformation of gas diffusion layer (GDL) due to clamping pressure is modeled using a finite element method, and the results are applied as inputs to a CFD model. The CFD analysis is based on finite volume method in non-isothermal condition. Also, a comparison is made between three cases to identify the geometry that has the best performance. The distribution of temperature, current density and mole fraction of oxygen are investigated for the geometry with best performance. The results reveal that by decreasing the width of channel, the performance of PEMFC improves due to increase of flow velocity. Also, it is found that intrusion of GDL into the gas flow channel due to assembly pressure deteriorates the PEMFC performance, while decrease of GDL thickness and GDL porosity have smaller effects. It is shown that assembly pressure has a minor effect on temperature profile in the membrane-catalyst interface at cathode side. Also, assembly pressure has a significant effect on ohmic and concentration losses of PEMFC at high current densities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
