Abstract

The heat transfer and thermochemical reaction are numerically investigated for the solar driven methane dry reforming process, coupling with the solar radiation transport from concentrator to the interior of volumetric reactor. Using a Monte Carlo ray tracing method, the solar radiation concentration with a multi-dish system and absorption by the foam structure in the reforming reactor are simulated. The solar power density distribution in reforming reactor and the optical efficiency of system are determined and compared at different foam structural parameters. Then, an integrated model of transport phenomena is developed to analyze the thermal and chemical performances under different operating conditions. The results indicate that solar radiation absorption and distribution in the reactor are greatly affected by the foam structural parameters, while the optical efficiency has no significant variation. Assumption of the concentrated solar radiation as collimated leads to a temperature deviation of approximately 10%. Besides, the methane conversion increases with increasing porosity and cell size, and decreases markedly with increasing inlet velocity and CH4/CO2 ratio.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.