Thermal analysis of palm mid‐fraction, cocoa butter and milk fat blends by differential scanning calorimetry

Abstract

AbstractCommercial samples of anhydrous milk fat (AMF), Ivory Coast cocoa butter (CB) and palm mid‐fraction (PMF) were blended in a ternary system. The melting characteristics of the blends were studied by differential scanning calorimetry (DSC). Results suggest that in the studies of interaction involving more than two fats, partial area (Ai) under the melting peak should be converted to partial enthalpy (ΔHi) rather than to solid fat index. The ΔH values of the blends decreased as the amount of AMF was increased and increased as the amount of CB was increased. In general, the effect of PMF was less pronounced compared to the effect of the other two fats. Eutectic effects within the ternary system could be detected by measuring the deviation of melting enthalpy by DSC, and from the corresponding values that were calculated for the thermodynamically ideal blends. The deviation reached a maximum when the amount of AMF was about 33%. On the binary line of CB/PMF, the eutectic effect was maximum at about 50–75% PMF. The interaction effect in the system was more noticeable at 30 and 20°C than at lower temperatures. Evaluation at 30°C was preferred because both the effect of AMF in the ternary system and the effect of PMF on the binary line were more readily observed.