Abstract
Purpose: The aim of this paper is to present a modern manufacturing method of production and compare the thermal, mechanical, properties of composite materials with aluminium alloy matrix reinforced by Al2O3 particles. Design/methodology/approach: The material for investigation was manufactured by the method of powder metallurgy (consolidation, pressing, hot concurrent extrusion of powder mixtures of aluminium EN AW-AlCu4Mg1 (A) and ceramic particles Al2O3). The amount of the added powder was in the range of 5 mass.%, 10 mass.% and 15 mass.%. Findings: The received results concerning the enhancement of hardness, which show the possibility of obtaining the MMC composite materials with required microstructure, influencing the properties of the new elaborated composite materials components. Concerning the thermal properties, especially the linear thermal expansion coefficient was measured, as well as the dilatometric change of the sample length was analysed. Practical implications: Concerning practical implications it can be stated that the tested composite materials can be applied among others in the transportation industry, but it requires additional research. Originality/value: The received results show the possibility of obtaining new composite materials with controlled and required microstructure with possible practical implications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Achievements in Materials and Manufacturing Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
