Abstract
Aerospace missions require that pyrotechnic compositions are able to withstand 180 °C. Therefore, this paper studies the thermal stability and output performance of boron/potassium nitrate (abbreviated BPN) used in pyrotechnic devices. Firstly, differential scanning calorimetry (DSC) and thermogravimetric (TG) tests are used to analyze the thermal reaction process of KNO3, boron, and BPN to qualitatively judge their thermal stability. Then, apparent morphology analysis, component analysis, and the p-t curve test, which is the closed bomb test to measure the output power of the pyrotechnic composition, are carried out with BPN samples before and after the high-temperature test to verify BPN stability at 180 °C. The weight change of boron powder caused by chemical reactions occurs above 500 °C. When the temperature is lower than the peak exothermic temperature of decomposition, no obvious chemical reaction occurs with KNO3, and only physical changes (crystal transformation and melting) occur. Combined with a verification test at 180 °C for two days, it is concluded that boron and KNO3 components are stable at 180 °C. With an increase in boron content, the thermal stability of BPN is improved, with the best performance achieved when the ratio is 25:75 (B:KNO3). BPN samples without binder have the best thermal stability. In a test at 180 °C for five days, the binder affects the weight loss and p-t curve of BPN, and BPN with fluororubber binder is better than BPN with unsaturated polyester binder.
Highlights
Boron/potassium nitrate (B/KNO3 ; abbreviated BPN) can be used for the output charge of an engine igniter, a fire transfer charge, a small thrust dynamite output charge, a high temperature projectile charge, etc
The results show that with an increase of boron content, the exothermic peak is advanced, but the thermal stability of BPN samples are improved, with the 2#BPN sample (25:75) showing the best performance
We studied the thermal decomposition process of KNO3, boron and BPN based on TG and differential scanning calorimetry (DSC) test data
Summary
Boron/potassium nitrate (B/KNO3 ; abbreviated BPN) can be used for the output charge of an engine igniter, a fire transfer charge, a small thrust dynamite output charge, a high temperature projectile charge, etc. BPN has the significant characteristics of high combustion heat and low moisture absorption per unit weight. [1] BPN is listed as a linear reference for the security of pyrotechnic agents [2]. Aerospace missions require that BPN composition is thermally stable. In some special launch missions [3], such as of deep space spacecraft, pyrotechnic devices must withstand a large temperature range, usually from −100 to +130 ◦ C [4,5]. Considering that there is a certain safety.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
