Abstract
AbstractThe reserved cast austenitic stainless steels (CASS) for primary circuit piping in Daya Bay Nuclear Power Plant were studied. The changes of microstructure, mechanical properties and fracture behavior were investigated using SEM, EPMA, TEM and nanoindentation after accelerated aging at 400°C for up to 10000 h. Microhardness of ferrite increased rapidly in the early stage and then increased slowly later. The impact energy of materials declined with the aging time and reduced to a very low level after aging for 10000 hours. Fracture morphology displayed a mixture of cleavage in ferrite along with dimple and tearing in austenite. Two kinds of precipitations were observed in ferrite by TEM after long periods of aging. The fine Cr-enriched α′ phases precipitated homogeneously in ferrite, and a few larger G phases were observed as well. The precipitation of α′ phases was considered to be the primary mechanism of thermal aging embrittlement in CASS.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
