Thermal aging of an anhydride-cured epoxy resin

Abstract

Fiber reinforced polymer (FRP) composites with anhydride cured epoxy resin matrices are widely used in civil engineering (e.g., pultruded FRP plates and bars), and their thermal aging behavior is a concern when they are subjected to elevated temperatures (e.g., FRP chimney). In the present article, thermal aging of an epoxy resin matrix at 130 °C–160 °C for 30 days was performed, and the effects on the flexural properties, molecular structures, free volume fraction, and mechanical properties were investigated. FTIR spectroscopy indicated that oxidation and molecular rearrangement occurred in the skin of the epoxy samples during thermal aging. Dynamic mechanical thermal analysis (DMTA) further illustrates the dominant effect of the molecular rearrangement in the sample skin with a thickness less than 100 μm, leading to a new high temperature tan δ peak. The free volume fraction of the skin and the bulk epoxy sample was characterized by positron annihilation lifetime spectroscopy (PALS). The results indicate that a noticeable reduction of the apparent free volume fraction occurred in the sample skin, while the bulk sample was only slightly affected. The flexural results indicate that thermal aging obviously reduced the break strain, while the flexural strength was only slightly affected and the modulus increased.