Abstract
In grinding process, a small amount of grinding fluid can be injected into the contact area for cooling and lubrication. This leads to decrease of the grinding fluid utilisation efficiency and workpiece surface integrity. Based on fluid mechanics theory, a mathematical model of two-phase flow field is established and the simulation of the grinding fluid jet is carried out by FLUENT. The distribution of grinding fluid and the pressure variation curve of the jet process are obtained. The results show that less utilisation efficiency of the grinding fluid in contact area is a combined effect of high pressure airflow, severe backflow and large pressure difference. The utilisation efficiency of the grinding fluid can be improved when jet occurs at the middle position with higher velocity. In addition, in the grinding experiment of surface roughness, the suitable supply parameters are proved by analysing Ra values of the parts.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Computational Materials Science and Surface Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
