Theoretical treatment of the solidification of undercooled Fe-Cr-Ni melts

Abstract

The solidification behavior of undercooled Fe-Cr-Ni melts is analyzed with respect to the competitive formation of body-centered cubic (bcc) phase (ferrite) and face-centered cubic (fcc) phase (austenite). The activation energies of homogeneous nucleation and growth velocities for both phases as functions of undercooling of the melt are calculated on the basis of current theories of nucleation and dendrite growth using data of thermodynamic properties available in the literature. As model systems for numerical calculations, the alloys Fe-18.5Cr-11Ni forming primary ferrite and Fe-18.5Cr-12.5Ni forming primary austenite under near-equilibrium solid-ification conditions are considered. Nucleation of the bcc phase is always promoted in the under-cooled primary ferrite alloy, whereas the barrier for bcc nucleation falls below that for fcc nucleation for large undercooling in primary austenite alloys. With rising undercooling, tran-sitions of the fastest growth mode were found from bcc to fcc and subsequently from fcc to bcc for the primary ferrite forming alloy and from fcc to bcc for the primary austenite forming alloy. The results of the calculations provide a basis for understanding contradictory experi-mental findings reported in the literature concerning phase selection in rapidly solidified stainless steel melts for different process conditions.