Abstract

Silicon carbide nanotubes (SiCNTs) have broad application prospects in optoelectronic devices. Based on first principles calculation, the influence of group III elements X (X = B, Al, Ga and In) doping on the optical properties of SiCNTs was studied. At 250–620 nm, because the hole concentration of X C -SiCNTs (when C is substituted) is less than that of X Si -SiCNTs (when Si is substituted), the minority carrier lifetime is longer than that of X Si -SiCNTs, therefore, the absorption peak of X C -SiCNTs is low and wide, while that of X Si -SiCNTs is high and narrow. Starting from 400 THz to 500 THz, with the increase of photo-generated carriers, the photoconductivity of X Si -SiCNTs and X C -SiCNTs increases, reaching the maximum at 700–800 THz. As the recombination rate increases, the conductivity begins to decrease, and it drops to a minimum near 1000 THz. Both dielectric constant and reflectivity show that SiCNTs doped with Si sites exhibit metallic characteristics at 340–380 nm. • Differences in optical properties caused by substitution of C and Si atoms by group III in SiCNTs were investigated. • At 250~620nm, the absorption peak of X C -SiCNTs is low and wide, while that of X Si -SiCNTs is high and narrow. • With the increase of electrons, the photoconductivity of doped SiCNTs increases, reaching the maximum at 700~800THz. • Both permittivity and reflectivity show that SiCNTs doped with Si sites exhibit metallic characteristics at 340~380nm. • The results show that SiCNTs can be used in photodetection devices and photosensitive semiconductor devices.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call