Abstract
Based on the features of laser diode end-pumped lasers, a thermal model of Yb:KY(WO 4) 2(Yb:KYW) with square cross-section was established. Considering the heat transfer on side faces, the anisotropic of thermal conductivity and the latest reports about thermo-optic coefficient, thermal expansion coefficient and thermal conductivity, temperature distribution, end-pumped face distortion and thermal lens focal length of Yb:KYW were more precisely obtained using finite difference method to solve Poisson equation in a rectangular Cartesian coordinate for the first time. At the pump power of 14 W, the highest temperature located at the center of end-pumped face was 243.8 °C, the highest distortion was 0.28 μm, and the thermal lens focal length was 5.4 cm along z-axis and −4.9 cm along x-axis. The results show that thermal lensing effects in the b-cut Yb:KYW were mainly determined by the anisotropic thermal expansion of Yb:KYW, and further present thermal lensing effects become weaker after considering the heat transfer. This work is significant for compensating the thermal lensing effect and improving the resonator stability of diode-pumped anisotropy crystal lasers.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
