Abstract
the injector into two parts: the recessed chamber and the section before the recessed chamber. The gaseous injector flow before the recessed chamber is considered to be steady; only the response of the mass flow rate at the exit of coaxial injector to the pressure fluctuation at the liquid injector inlet has been investigated. The dynamic characteristics of the coaxial swirl injector can now be considered as two processes: the dynamics of the liquid swirl injector and the dynamics of the recessed chamber. The transfer function of the whole injector is obtained by combining the transfer functions of these two processes. The influence of the injector configuration and working condition on the injector dynamic characteristics was also studied. A smaller mixing ratio, larger mass flow rate, higher ambient pressure, smaller ratio of recess length to diameter, and larger geometry parameter would decrease theamplituderesponse ofthemass flowratepulsation, buttheseparametershavelittleeffectonthephasefrequency of the coaxial swirl injector.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.