Abstract
Boring and Trepanning Association (BTA) deep hole drilling is used for producing holes with high aspect ratios. In this process, chatter vibration sometimes occurs, and a rifling mark is formed on the bore surface. The rifling mark generating phenomenon is considered to be a result of self-excited vibration caused by time delay. An analytical model is proposed considering the supporting condition of the boring bar in detail. In a real machine for BTA drilling, the boring bar is supported at the oil pressure head and the supporting pad, as well as at the base. The stability of the self-excited vibration is analyzed numerically, and the result is compared with the experiment. The theoretical and experimental results agree well with each other. Furthermore, the effect of an additional guide pad proposed by the authors as a countermeasure is evaluated theoretically and experimentally.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Machine Tools and Manufacture
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
