Abstract
In order to clarify the influence of fiber volume fraction on the thermal properties of cement concrete, and improve the calculated accuracy, thermal conductivities of steel fiber reinforced concrete (SFRC) and carbon fiber reinforced concrete (CFRC) were researched through experiments (the QTM-300 or the LFA457) and the composite theory’s models. The influence of fiber volume fraction and the water-cement (W/C) ratio on thermal conductivities of SFRC and CFRC was investigated. Afterwards, the thermal conductivities of fiber reinforced concrete (FRC) were calculated respectively via two-phase theoretical models, multi-phase theoretical models which were derived by composite material theory, and multi-phase prediction model which was proposed based on the different composition materials’ thermal conductivity (cement mortar, aggregate, different fiber) and their volume fraction. Additionally, the above three models were compared and verified by experimental results respectively. The results show that although the volume fraction of the fibers in the concrete is the smallest, the FRC should be still seen as three-phase composite materials. Therefore, the thermal conductivity of FRC will be better predicted by both of the three-phase serial-parallel model and multi-phase prediction model, and the calculated results of the prediction model are closer to experimental results.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
