Abstract

The measurement of precise along-track displacements has been made with the multiple-aperture interferometry (MAI). The empirical accuracies of the MAI measurements are about 6.3 and 3.57 cm for ERS and ALOS data, respectively. However, the estimated empirical accuracies cannot be generalized to any interferometric pair because they largely depend on the processing parameters and coherence of the used SAR data. A theoretical formula is given to calculate an expected MAI measurement accuracy according to the system and processing parameters and interferometric coherence. In this paper, we have investigated the expected MAI measurement accuracy on the basis of the theoretical formula for the existing X-, C- and L-band satellite SAR systems. The similarity between the expected and empirical MAI measurement accuracies has been tested as well. The expected accuracies of about 2–3 cm and 3–4 cm (γ = 0.8) are calculated for the X- and L-band SAR systems, respectively. For the C-band systems, the expected accuracy of Radarsat-2 ultra-fine is about 3–4 cm and that of Sentinel-1 IW is about 27 cm (γ = 0.8). The results indicate that the expected MAI measurement accuracy of a given interferometric pair can be easily calculated by using the theoretical formula.

Highlights

  • A substantial improvement in measuring the along-track displacement has been made with the multiple aperture Synthetic aperture radar (SAR) interferometry (MAI) proposed by Bechor and Zebker [15]

  • We investigate the expected multiple-aperture interferometry (MAI) measurement accuracy on the basis of the theoretical formula for the existing X, C- and L-band satellite SAR systems and represent the similarity between the expected and empirical MAI measurement accuracies, where the empirical accuracies were calculated by using in-situ GPS measurements

  • The measurement of the precise along-track displacements has been made with the multiple aperture SAR interferometry (MAI)

Read more

Summary

Introduction

Synthetic aperture radar (SAR) interferometry (InSAR) has been successfully used for observations of surface displacements such as earthquakes, volcanic eruptions, ground subsidence, landslides, etc. [1,2,3,4,5,6,7,8,9,10,11]. The pixel-offset method has been proposed for measuring the along-track displacement from two or more amplitude SAR images. This method has been widely used for measuring the 3D displacements [14], but it is not allowed to the improvement of the displacement model parameter estimation due to its reduced sensitivity. A substantial improvement in measuring the along-track displacement has been made with the multiple aperture SAR interferometry (MAI) proposed by Bechor and Zebker [15]. The pixel offset measurement for the ALOS PALSAR interferometric pair has the improved accuracy of about 7.1 cm [22] It corresponds to about 1.6% of the azimuth resolution. MAI measurement accuracies among the existing satellite SAR systems including TerraSAR-X, COSMO-SkyMed, Kompsat-5, ERS-1/2, Envisat, Sentinel-1, Radarsat-2, JERS-1, ALOS PALSAR, ALOS2-PALSAR2

Methodology
Measurement Uncertainties of MAI Method
Theoretical Accuracies of MAI Measurements
X-Band
C-Band
L-Band
Findings
Discussion and Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call