Abstract
Here we report on the first IP3 results of a 35-GHz Ka-band amplifier based on InAlAs/InGaAs-InP heterofunction bipolar transistors (HBT's). The amplifier combines four 1×10 μm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> quad-emitter HBT devices for a total emitter area of 160 μm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> to achieve a gain of 5 dB and an IP3 of 26.5 dBm at 35 GHz. IP3 was characterized over collector bias voltage and indicates that there is an optimum V/sub ce/, corresponding to a maximum IP3 to DC power ratio, which is related to the HBT nonlinear voltage-dependent collector-base capacitance. A maximum IP3-to-DC power linearity figure of merit (LFOM) of 4.1 is achieved at a total collector current of 48 mA and a low V/sub ce/ of 2.25 V, This LFOM is comparable to HEMT's at these frequencies and is expected to improve with the maturity of InAlAs/InGaAs-InP HBT technology.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
