The vibroacoustic characteristics and regulation rules of Panel–Cavity–Panel System controlled by Piezoelectric Shunt Oscillators with negative capacitors

Abstract

Piezoelectric Shunt Oscillators (PSOs) are widely used in the passive and semi-active control of the vibration and acoustic radiation of flexible structures, due to PSOs’ high electromechanical coupling coefficients, robustness, effectiveness and adjustability at low frequencies. Panel–Cavity–Panel System (PCPS) is a common type of flexible structures, such as interior panels and windows of automobiles. In this paper, a theoretical model of PCPS controlled by PSOs and its vibration equations are established. The vibroacoustic characteristics of PCPS, including sound absorption coefficient (SAC), energy loss coefficient (ELC) and transmission loss (TL), are calculated using a unified mathematical form based on the vibroacoustic radiation impedance matrix, damping matrix and displacement response of PCPS, while a lumped parameter model of PCPS is derived to simplify the comprehension and extension of PCPS. Then the finite element simulation is used to calculate the vibroacoustic characteristics of the PCPS, which achieves good agreement with theoretical results, while three basic regulation modes are also summarized and verified. The regulation mechanism of PCPS controlled by PSOs is further analyzed by the velocity response of each panel. Finally, experiments of PCPS controlled by PSOs with negative capacitors are conducted in a standing wave tube, at non-eigenfrequencies ranging from 70 Hz to 220 Hz. It is found in experiments that PSOs with negative capacitor can increase the TL of PCPS about 8 dB to 25 dB, which depends on the target frequency. SAC and ELC can also be increased, which means less acoustic energy is reflected and more acoustic energy is dissipated in the shunt circuits.