The Vibrational Behavior of Coupled Bladed Disks with Variable Rotational Speed

Abstract

AbstractLow pressure steam turbine blades are subjected to high static and dynamic loads during operation. These loads strongly depend on the turbine's rotational speed, leading to entirely new load conditions. To avoid high dynamic stresses due to the forced vibrations, a coupling of the blades, such as shrouds or snubber coupling, is applied to reinforce the structure. In this work the influence of the rotational speed on the vibration behavior of shrouded blades is investigated. Two fundamental phenomena are considered: the stress stiffening and the spin softening effect. Both effects are caused by centrifugal forces and affect the structural mechanical properties, i.e. the stiffness matrix K, of the rotating system. Since the rotational speed Ω appears quadratically, it is possible to derive the stiffness matrix as a second order matrix polynomial in Ω2 [3].In the case of shrouded blades, contact forces between neighboring blades must be taken into account. The contact status and the pressure distribution in particular is strongly influenced by the rotational speed, respectively, centrifugal forces, caused by the untwisting and radial deformation of the blades. For the calculation, a three dimensional structural mechanical model including a spatial contact model is considered. The solution of the nonlinear equations of motion is based on the well known Multiharmonic Balance Method [2]. Here, the nonlinear forces are computed in the time domain and transferred in the frequency domain by the use of the Fast Fourier Transformation (FFT), also known as the Alternating Frequency Time method (AFT) [1]. (© 2015 Wiley‐VCH Verlag GmbH & Co. KGaA, Weinheim)