The use of topography-based parameters for the assessment and prediction of surface wear

Abstract

This paper examines the use of surface parameters as ‘tools’ for assessing and predicting surface wear. It begins by briefly reviewing other work published on wear assessment based on entirely topography-based parameters, and concludes that other elements of surface condition are needed, in addition to topography, to assess and characterise the contact if topography-based parameters are to be employed to predict wear. This paper discusses why areal measurements of bearing area and plasticity index are suitable candidates as a basis for assessing and predicting surface wear, and outlines the potential value of using these parameters in conjunction with a wear equation. The validity of this suggestion is illustrated by some preliminary data from a series of pin-on-disc wear experiments involving areal assessments of the bearing area and plasticity index of the rough tip of a brass pin. Predictions of the first stage of a wear simulation are compared to experimental data, and the paper concludes by presenting some general conclusions and suggestions about how the work could be developed.