THE USE OF SCHLUMBERGER AND EQUATORIAL SOUNDINGS IN GROUNDWATER INVESTIGATIONS NEAR EL PASO, TEXAS

Abstract

Electrical soundings using the symmetric AMNB Schlumberger and the bipole‐dipole equatorial arrays were made along two profiles near El Paso, Texas, in support of a groundwater exploration program which included seismic refraction and gravity surveys. Electrode spacings ([Formula: see text] or R) reaching 12,000 ft allowed exploration to depths of about 7000 ft. Geoelectrical information on the subsurface materials was augmented by sounding with the bilateral equatorial configuration and by transforming Schlumberger curves into dipole‐polar sounding curves with formulas developed by Al’pin and by Tsekov. The bilateral equatorial sounding curves were found useful for detecting the direction of dip of highly resistive bedrocks whereas transformed sounding curves were used to evaluate the average longitudinal resistivity, and hence the depth, to the “electric basement.” A few of the Schlumberger sounding curves were either clearly or subtly distorted by nonhorizontal geologic structures. The interpretation of these sounding curves illustrates the requirement for careful analysis in processing electrical prospecting data obtained over complex geologic conditions. The interpretation of a combined Schlumberger‐equatorial sounding curve, which did not agree with the preliminary interpretation of seismic refraction data, was confirmed to be correct by data from a test well drilled to a depth of 4363 ft. The application of electrical sounding data in the El Paso area furnished valuable information on the depth to fresh‐water‐salt‐water interfaces and on the depth to highly resistive impervious bedrocks.