Abstract

BackgroundFluorodeoxyglucose (18F-FDG) positron emission tomography/computed tomography (PET/CT) is an important method for detecting tumours, planning radiotherapy treatment, and evaluating treatment responses. However, using the standardized uptake value (SUV) threshold with PET imaging may be suitable not to determine gross tumour volume but to determine biological target volume (BTV). The aim of this study was to extract internal target volume of BTV from PET images.MethodsThree spherical densities of 18F-FDG were employed in a phantom with an air or water background with repetitive motion amplitudes of 0–30 mm. The PET data were reconstructed with attenuation correction (AC) based on CT images obtained by slow CT scanning (SCS) or helical CT scanning (HCS). The errors in measured SUVmax and volumes calculated using SUV threshold values based on SUVmax (THmax) in experiments performed with varying extents of respiratory motion and AC were analysed.ResultsA partial volume effect (PVE) was not observed in spheres with diameters of ≥ 28 mm. When calculating SUVmax and THmax, using SCS for AC yielded smaller variance than using HCS (p < 0.05). For spheres of 37- and 28-mm diameters in the phantom with either an air or water background, significant differences were observed when mean THmax of 30-, 20-, or 10-mm amplitude were compared with the stationary conditions (p < 0.05). The average THmax values for 37-mm and 28-mm spheres with an air background were 0.362 and 0.352 in non-motion, respectively, and the mean THmax values for 37-mm and 28-mm spheres with a water background were 0.404 and 0.387 in non-motion and 0.244 and 0.263 in motion, respectively. When the phantom background was air, regardless of sphere concentration or size, THmax was dependent only on motion amplitude.ConclusionsWe found that there was no PVE for spheres with ≥ 28-mm diameters, and differences between SUVmax and THmax were reduced by using SCS for AC. In the head-and-neck and the abdomen, the standard values of THmax were 0.25 and 0.40 with and without respiratory movement, respectively. In the lungs, the value of THmax became the approximate expression depending on motion amplitude.

Highlights

  • Fluorodeoxyglucose (18F-FDG) positron emission tomography/computed tomography (PET/Computed tomography (CT)) is an important method for detecting tumours, planning radiotherapy treatment, and evaluating treatment responses

  • We examined tumour sizes for which a partial volume effect (PVE) was not observed [13,14] in addition to changes in Maximum standardized uptake value (SUVmax) and threshold values based on SUVmax (THmax) according to the degree of motion amplitude [15,16,17], the position of the tumour [18], and the method of attenuation correction [19,20,21]

  • When evaluating all recovery coefficient (RCo) values measured using each of the CT methods and both of the background media used, no PVE influence on RCo was observed in spheres with diameters of 28 mm or larger

Read more

Summary

Introduction

Fluorodeoxyglucose (18F-FDG) positron emission tomography/computed tomography (PET/CT) is an important method for detecting tumours, planning radiotherapy treatment, and evaluating treatment responses. Using the standardized uptake value (SUV) threshold with PET imaging may be suitable not to determine gross tumour volume but to determine biological target volume (BTV). Positron emission tomography/computed tomography (PET/CT) has become an important and commonly used imaging method to detect tumours, plan radiotherapy treatment, and evaluate responses to therapy, as it allows for simultaneous functional and anatomical imaging. During treatment planning for radiation therapy, gross tumour volume (GTV) is calculated based on CT images. It has been reported that when planning treatment for tumours of the head-and-neck, inter- and intra-observer differences in GTV may be reduced by using PET images [1].

Objectives
Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call