The use of non-cavitating coupling fluids for intensifying sonoelectrochemical processes.

Abstract

For the first time, we have investigated the beneficial effects of non-cavitating coupling fluids and their moderate overpressures in enhancing mass-transfer and acoustic energy transfer in a double cell micro-sonoreactor. Silicon and engine oils of different viscosities were used as non-cavitating coupling fluids. A formulated monoethylene glycol (FMG), which is a regular cooling fluid, was also used as reference. It was found that silicon oil yielded a maximum acoustic energy transfer (3.05W/cm2) from the double jacketed cell to the inner cell volume, at 1bar of coupling fluid overpressure which was 2.5 times higher than the regular FMG cooling fluid. It was also found that the low viscosity engine oil had a higher acoustic energy value than that of the high viscosity engine oil. In addition, linear sweep voltammograms (LSV) were recorded for the quasi-reversible Fe2+/Fe3+ redox couple (equimolar, 5×10-3 M) on a Pt electrode in order to determine the mass-transport limited current density (jlim) and the dimensionless Sherwood number (Sh). From the LSV data, a statistical analysis was performed in order to determine the contribution of acoustic cavitation in the current density variation |Δj|average. It was found that silicon oil at 1bar exhibited a maximum current density variation, |Δj|average of ~2mA/cm2 whereas in the absence of overpressure, the high viscosity engine oil led to a maximum |Δj|average which decreased gradually with increasing coupling fluid overpressure. High viscosity engine oil gave a maximum Sh number even without any overpressure which decreased gradually with increasing overpressure. The Sh number for silicon oil increased with increasing overpressure and reached a maximum at 1bar of overpressure. For any sonoelectrochemical processes, if the aim is to achieve high mass-transfer and acoustic energy transfer, then silicon oil at 1bar of overpressure is a suitable candidate to be used as a coupling fluid.