Abstract
Brushless doubly fed induction machines (BDFIMs) have been extensively researched over because of the possibility of using a partially rated inverter in many applications with limited speed variations. However, the special cage rotor construction and substantial rotor losses is one of the key deficiencies of these machines. A similar and extremely interesting machine, the brushless doubly fed reluctance machine (BDFRM), has been largely ignored in comparison. This was mainly due to the fact that reluctance rotor designs were not capable of generating saliency ratios large enough to make the BDFRM competitive with other machines. However, developments in reluctance rotors, spurred on by research into synchronous reluctance machines, have resulted in high-saliency-ratio cageless rotors that are economical to build. This, together with the promise of higher efficiency and simpler control compared to the BDFIM, means that further investigation of the BDFRM is warranted. This paper presents a comparative theoretical analysis and aspects of practical implementation of the important control strategies and associated machine performance/inverter size tradeoffs for the BDFRM in the light of its most likely applications-large-pump-type adjustable-speed drives and variable-speed constant-frequency wind power generation systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have