Abstract
The aim of this experimental investigation was to study kinetics of Fenton and modified Fenton oxidation applied to miscellaneous dye solutions. Several bench scale laboratory tests for the treatment of colored wastewaters containing model pollutant compounds, reactive azo dyes C.I. Reactive Violet 2 (RV2) and C.I. Reactive Yellow 3 (RY3) were performed. In order to examine the effects of initial Fe 2+ concentration, oxidant/catalyst molar ratio and oxidant type on TOC reduction and color removal, the following reactants were used: classic Fenton's reagent (Fe 2+/H 2O 2) and modified Fenton's reagent, where potassium peroxodisulfate, alone and in combination with hydrogen peroxide, was selected as oxidant. Response surface methodology (RSM), particularly D-optimal design, was used for the purpose. This research contributed in several ways: (i) evaluation of more effective Fenton oxidant on pollutant content reduction, in terms of TOC and color removal, (ii) assessment of the optimal reactant doses, (iii) describing the RV2 kinetic behavior in applied systems and (iv) determining the apparent rate constants. Mineralization was described by pseudo-first-order kinetics with observed rate constant k m = 0.0133 min −1. A kinetic model describing discoloration was composed of two first-order in-series reactions with discoloration rates; k 1 = 0.9447 min −1 and k 2 = 0.0236 min −1, at optimal operating conditions and with the highest initial organic load.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.