The Use of Different Deacetylation Temperature Toward Quality of Chitosan Mud Crab Shell (Scylla serrata)

Abstract

This research aims to determine the chemical composition (proximate) of chitosan and chitin, The best deacetylation temperature for obtaining chitosan, and the yield of chitosan and chitin from mud crab. This research was conducted in two stages, that is: 1) Preparation of mud crab flour and 2) Extraction and analysis of chitin and chitosan. The experimental design used for chitosan isolation was Completely Randomized Design (CRD). The process of deacetylation chitin becomes chitosan by using 50% NaOH with varying heating temperatures (120, 130, and 140°C). Parameters observed were yield, moisture content, ash content, and degrees of deacetylation. The result showed that the best chitosan was obtained by chitin deacetylation process into chitosan using a temperature of 130°C (KO2). Characteristics quality of the chitosan mud crab shell produced are KO1: yield 61.00%, moisture content 6.47%, ash content 17.18% (db), and degree of deacetylation 49.63%. KO2: yield 59.94%, moisture content 6.48%, ash content 14.85% (db) with degree of deacetylation 51.13%. KO3: yield 53,97, moisture content 6.54%, ash content 14.66% (db) and degree of deacetylation 52.63%. Characteristic quality of chitin included yield was 27.81%, moisture content 7.29%, ash 44.05%, and degree of deacetylation 33.09%.