The Use of Biofilters to Reduce Atmospheric Methane Emissions from Landfills: Part I. Biofilter Design

Abstract

Previous laboratory research has shown that biofilters have the potential to reduce CH4 emissions from landfills by as much as 83%. However, to achieve this level of CH4 reduction biofilters must be properly designed. The present study was conducted to develop a method for properly designing biofilters based on landfill size and location. A quadratic equation was developed to describe the dependence of CH4 oxidation rate in a sandy loam textured soil as a function of soil temperature, soil moisture and ammonium nitrogen concentration. Using this equation and the average monthly soil temperature and moisture contents for the largest cities of each of the 48 contiguous states, the monthly CH4 oxidation rate at each location was calculated. Then, assuming a standard landfill depth of 27.6 m, and a standard area of 121,500 m2, the required biofilter size was calculated. Finally, the ratio of biofilter size to landfill size was calculated. Design calculations for biofilters located in the states of Alabama, Florida, Georgia, Louisiana, Mississippi, North Carolina, South Carolina and Texas where the CH4 oxidation rates are relatively high throughout the year indicate that the necessary biofilter sizes are small. In addition, biofilters in these states may be expected to be effective throughout the year. In contrast, the calculations indicated biofilter systems in the states of Idaho, Minnesota and North Dakota will have much lower efficiencies during much of the year due to unfavorable soil moisture and temperature ranges. Given proper design, installation and management, a biofilter should be capable of achieving a significant reduction in atmospheric CH4 emission as compared to emissions from the same landfill without a biofilter.