The use of an electrothermal plasma gun to simulate the extremely high heat flux conditions of a tokamak disruption

Abstract

Disruption damage conditions for future large tokamaks like ITER are nearly impossible to simulate on current tokamaks. The electrothermal plasma source SIRENS has been designed, constructed, and operated to produce high density (> 1025/m3), low temperature (1–3 eV) plasma formed by the ablation of the insulator with currents of up to 100 kA (100 μs pulse length) and energies up to 15 kJ. The source heat fluence (variable from 0.2 to 7 MJ/m2) is adequate for simulation of the thermal quench phase of plasma disruption in future fusion tokamaks. Different materials have been exposed to the high heat flux in SIRENS, where comparative erosion behavior was obtained. Vapor shield phenomena has been characterized for different materials, and the energy transmission factor through the shielding layer is obtained. The device is also equipped with a magnet capable of producing a parallel magnetic field (up to 16 T) over a 8 msec pulse length. The magnetic field is produced to decrease the turbulent energy transport through the vapor shield, which provides further reduction of surface erosion (magnetic vapor shield effect).