The ultimate bearing capacity of shallow strip footings using slip-line method

Abstract

Based on the limit equilibrium theory, an accurate approach is proposed to solve the ultimate bearing capacity of shallow strip footings under general conditions. The foundation soil is considered to be an ideal elastic-plastic material, which obeys the Mohr-Coulomb yield criterion, and is assumed to be an ideal continuous medium which is isotropic, homogeneous and incompressible or non-expansive. Through analyzing the relative motion and interaction between the footing and soil, the problem of the ultimate bearing capacity of shallow strip footings is divided into two categories. A minimum model with the total vertical ultimate bearing capacity as its objective function is established to solve the ultimate bearing capacity using the slip-line method with no need to make any assumptions on the plastic zone and non-plastic wedge in advance. A convenient and practical simplified method is also proposed for practical engineering purposes. Furthermore, the first category of the problem in the case of the same uniform surcharges on both sides of footings is the focus of the study: the applicable conditions of Terzaghi’s ultimate bearing capacity equation as well as the theoretical exact solutions to its three bearing capacity factors are derived, and a new bearing capacity equation is put forward as a replacement for Terzaghi’s equation. The geometric and mechanical similarity principle is proposed by a dimensionless analysis. The results show that for perfectly smooth footings, the total vertical ultimate bearing capacity obtained by the present method is in good agreement with those by existing methods, whereas the existing methods underestimate the ultimate bearing capacity in the case of perfectly rough footings. The classic Prandtl mechanism is not the plastic failure mechanism of the ultimate bearing capacity problem of perfectly smooth footings on weightless soil.