Abstract
ABSTRACTThe tribopairs of water hydraulic plunger pumps are usually operated under severe conditions, due to the poor lubrication of water and silt suspended in natural water. It is essential to identify the desired engineering materials and material combinations for designing water pumps. As the candidate materials of tribopairs, the tribological characteristics of different Al2O3-TiO2 coatings combined with Si3N4 ceramics under silt-laden water and tap water lubrication were investigated. The Al2O3-TiO2 coatings with different weight percentages of TiO2 in a wide range from 3 to 100% were tested. The tribological characteristics of the various couple pairs were researched using a ring-on-ring test rig. The microstructures of the contact surfaces were analyzed with a scanning electron microscope before and after the test to study the wear mechanism. The experimental results indicate that the friction coefficient of the Al2O3-TiO2/Si3N4 tribopairs increases with an increase in the percentage of TiO2 content in the Al2O3-TiO2 coating. However, the TiO2 content does not present a clear relationship with the wear rate. Considering the friction and wear properties, Al2O3-13%TiO2 is the preferred coating to use in water hydraulic pumps when sliding against Si3N4.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
