Abstract
During this research work, the wear and friction properties of TiN/TiC coatings produced with different manufacturing parameters were investigated against steel and zirconium counterparts. The coatings, which were deposited on WC–Co substrate, were characterized based on their microstructure, phase composition, and microhardness. The tribological behavior of the coatings was examined in accordance with ASTM G99 and ASTM G133 standards using pin-on-disc tests with steel and zirconium counterfaces, while the adhesion of the coatings was investigated with a modified scratch test. According to the results obtained from the experiments, the use of zirconium counterpart is advantageous even for coatings produced with different microhardness and layer thickness using the CVD method. The results show that the change in the friction coefficient can be well traced with properly chosen parameters, thereby determining the wear resistance of the coating.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
