Abstract
The transfer impedance Z/sub t/ of a cable is often assumed to be a characteristic of the shield only. We investigate the limits of this assumption by calculations and measurements. The first test cable was formed by a solid copper tube (shield) and a wire inside; several positions, also non-central, were chosen for the wire. The common mode current (between 10 Hz and 100 kHz) through the tube had as return path a single wire, which was placed at several positions, near and at some distance from the shield. A second cable with a braided shield was tested as well. The results show that both the differential mode and the common mode circuit have to be carefully defined for a particular Z/sub t/. Varying either circuit may alter Z/sub t/ drastically. Consequently, the Z/sub t/ of a particular cable measured in a triaxial setup, is a characteristic of that setup and cannot always be used in another setup as in for instance cable bundles. >
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Electromagnetic Compatibility
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
