The Synthesis of <i>In Situ</i> Cu-NbC-VC Nanocomposites by Mechanical Alloying

Abstract

This paper presents a study on the synthesis of Niobium Carbide (NbC) and Vanadium Carbide (VC) in Copper (Cu) matrix by mechanical alloying (MA) technique. The elemental powders of Cu, Niobium (Nb), Vanadium (V) and synthetic graphite powder were mechanically alloyed for 30 hours at 400 rpm in a planetary ball mill Fritcsh “Pulverisette 6” according to the stoichiometric ratio of Cu-(10-x) vol%NbC-(0+x) vol%VC (x=1,3,5,7,9). The milling was performed under Argon atmosphere. The as-milled powder were compacted at 400 MPa and sintered using a microwave sintering furnace at 900°C with 1 hour soaking time. The phase identification was performed by using the X-ray Diffraction (XRD) analysis on the as-milled powders and sintered pellets. From the result, the NbC and VC phases were successfully formed after milling, and were precipitated after sintering. The average crystallite size and lattice strain of Cu, before and after sintering were 42.302 nm, 0.013%, and 71.294 nm, 0.004%, respectively.