Abstract
We investigated the physicochemical aspects of the gas-phase nanopowder synthesis using a cyclic compression reactor. Compression of precursors (methane, ethylene, acetylene) under conditions close to the adiabatic ones in the atmosphere of buffer monatomic gases (argon, helium, neon) was used. The influence of pressure in the reactor and volumetric ratio of precursor/buffer gas mixture on the composition, morphology, and structure of carbon-containing particles representing the pyrolysis product was studied. Complete pyrolysis was observed for all studied precursors, but under different conditions. Thermal decomposition of methane, having the minimum enthalpy of formation, was observed in an atmosphere with argon content 97.5 % at a peak pressure more than 10 MPa. Helium showed limited possibilities for thermal relaxation under the conditions of fast reactions (< 50 ms). Only acetylene with the maximum enthalpy of formation was decomposed in the atmosphere of helium. The solid reaction products represented black colored powders with a bulk density of 20–30 mg/cm3. The powders were examined by transmission electron microscopy and scanning electron microscopy, Raman scattering and X-ray diffraction analysis. The particles represent globular bulbous structures up to 100 nm in size, either hollow or filled inside. X-ray diffraction analysis showed the presence of a graphite-like structure with crystallite sizes less than 10 nm in all samples. Raman analysis showed mainly sp2 hybridization of carbon. The cyclic compression method demonstrates wide range of opportunities for the pyrolysis of hydrocarbons aiming at the production of a variety of carbon structures, which enables for the fine tuning in terms of the yield of products of the required morphology for practical use.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.