The Synergy of the Buried Interface Surface Energy and Temperature for Thermal Evaporated Perovskite Light-Emitting Diodes.

Abstract

Multisource coevaporation is such a promising method for the preparation of perovskite films. However, there is limited research about the effects of the buried interface on thermal-evaporated perovskite light-emitting diodes (PeLEDs). In this study, the effects of buried interfaces on thermal-evaporated all-inorganic perovskite films are systematically investigated. It is found that the low-surface-energy buried interface promotes the formation of columnar grain by suppressing heterogeneous nucleation, and functional groups on the high-surface-energy interface have a significant effect on the actual element ratio of the film. The substrate temperature can affect the nucleation and film-formation kinetics of the columnar grains. As a result of the synergistic strategy, a peak external quantum efficiency (EQE) of 8.6% is achieved in the green PeLEDs with a stable emission peak at 516 nm, which is among the best thermal-evaporated PeLEDs reported. This work provides an insight into the preparation of perovskites by thermal evaporation and builds the groundwork for future studies.