The surface of labradorite feldspar after acid hydrolysis

Abstract

After reaction with a pH < 4, the surface of labradorite is extensively enriched in Si and H, and depleted in Al, Ca and Na relative to an unreacted crystal. However, the amount of hydrogen measured in the reacted surface is less than that predicted on the basis of exchange of hydrogen (or hydronium) ions for cations in the feldspar. By analogy with studies of silicate glass, this low concentration of hydrogen suggests that some silanol groups in the reacted surface repolymerize subsequent to ion-exchange and depolymerization reactions. The net result is a relatively porous, Si-rich leached layer which is amorphous to electron diffraction, and which allows rapid diffusion of unreactive solutes. Both the surface area of the reacted feldspar and the porosity increase with acid hydrolysis. Modeling of nitrogen sorption onto the surface suggests that the pores have a nominal radius of ∼ 20–80 Å or less. This distribution of pore sizes resembles other acid-reacted silicate materials, such as glass, chrysotile and kaolinite. Although the mineral surface clearly becomes more porous during acid hydrolysis, the increase in powder area also does not coincide with an increase in the flux of dissolved Si from the powder. We thus attribute most of this increase in area to spallation of the silica-rich surface from the feldspar upon drying.