Abstract
The photo-reactive activators are highly reactive radical generators upon the ultraviolet (UV) light illumination. The photo-reactive initiators produced nitrogen radical and alkyl radical after releasing carbon dioxide. The radicals could react with polyimide (PI) main chains. These reactions enforced the alignment layers and exhibited high azimuthal anchoring energy. The thickness of photo-irradiated PI alignment layers were reduced dramatically by photo-induced crosslinking, which induced surface wrinkling and roughness. The carbon dioxide gases released from the thin films produced many micro-pores, which provides tight anchoring of liquid crystal (LC) molecules. The azimuthal anchoring energy obtain by photo-alignment was better than that obtain by rubbing method with the same PI. The maximum value was 6.92×10-5 J/m². Small aliphatic hydrocarbons, such as methane and propene, were released during photo-decomposition reaction from the PI surface. The polarity of film surface became more hydrophilic. The photo-alignment of LC was perpendicular to the polarization axis of UV light. On the basis of high anchoring energy, the rough surface, hydrophilic surface, and rapid photo-reactions, the photo-alignment mechanism is proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.