Abstract
The study of the welding process of asymmetric parts made of Ti-6A1-4V alloy was made to expand the field of application of the process of linear friction welding and to improve the use of technology of existing assemblies. During of the study, it was found that the process of welding T-joints has features in a longer duration of the unsteady stage and an increase in the amplitude value of the shear force during the steady state. Welded joints do not contain seam flaws over the area of the welded joint, which it made unnecessary to assign an allowance along the perimeter of the welded section. The change in conditions at the joint is expressed in an increase in the microhardness of the welded seam in comparison with the Ti-6A1-4V joints, which are produced by the traditional technology more than 50 HV.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
