The study of relative density in some dune and beach sands

Abstract

A new method was developed for the measurement of relative density in natural sand deposits. The method is based on hardening sand in the field, so that undisturbed samples can be obtained, and the later removal of the organic hardener in the laboratory. In the study of two coastal dunes use was made of “peels” which reveal in detail the internal structure of the sand. A definite relationship was established between relative density of the dune sand, its internal structure and mode of deposition. Very high relative densities, approaching and even exceeding 100%, were found in sand deposited by accretion on the top of the dunes. Low to very low relative densities were measured in slip deposits formed by avalanching of sand on the leeward slope of the dunes. High densities in accretion deposits are attributed to sand movement by saltation taking place during the accumulation of the sand and the very high kinetic energies expended during this transportation process. Low densities in the slip deposits are attributed to the process of avalanching which involves minimum energy expenditure. A more or less constant relative density of around 80% was found in the stretch of beach sand studied.